Description
What this kit enables you to do, is to install a reliable and high effective BSD (Blind Spot Detection System) which also incorporates an RCW (Rear Collision Warning System). The system designed by INNOVV uses the latest millimetre wave radar technology with a frequency range of 77-79 GHz, which then via an advanced software algorithm is able to detect and track target vehicles from both sides of the motorcycle and directly at the rear.
This information is then displayed visually to the rider via the LED warning triangle embedded within the OEM BMW mirrors, providing clear visual notification of detected vehicles.
The system has a wide angle (150°) field of detection and a distance range of 50 meters and is able to detect up to 64 individual targets within that zone.
The ThirdEYE system has 3 main modes of detection:
- BSD (Blind Spot Detection)
- LCA (Lane Change Assist)
- RCW (Rear Collision Warning)
In addition to the INNOVV ThirdEYE kit you will also receive the following parts, which will enable you to have a high level of “fit and finish” on your motorbike.
- 2 x OEM BMW R 1300GS mirrors with internal LED warning triangle illumination.
- 1M of durable and flexible outer cable tubing / sleeving
- 2 x ( 5cm x 10mm ID ) heat shrink tubing
- 6 x small cable ties
- 1 x Posi-tap connector
Please note: This kit has been specifically designed to work in conjunction with the OEM BMW mirrors. It is not possible to modify or adapt either of the original INNOVV ThirdEYE systems (Watch or Mirror) version to work with the OEM BMW mirrors due to the different voltage and current requirements.
TECH SPEC
Working Voltage | 9 ~16V DC |
Power Consumption | <3.5W |
Display Size | Watch Display: Dia 50 mm x13 mm Mirror Display: 35 mm x14 mm (each piece) |
Weight of Display | Watch Display: 130 g Mirror Display:100 g |
Radar Detector Size | Dia 36 mm x 26 mm |
Weight of Radar Detector | 90 g |
Storage Temperature | -40℃ ~+85℃ |
Working Temperature | -40℃ ~+80℃ |
Waterproof Rate | IP67 |
Working Frequency | 77~79 GHz |
Horizontal Angle | 150° |
Pitch Angel | ±25° |
Detecting Range | 0.2 m~50 m |
Accuracy of Detecting Range | 0.11 m |
Detecting Velocity Range | -210 km/h~210 km/h |
Data Updating Frequency | Every 50 ms |
Maximum Detecting Targets | 64 |
INSTALLATION VIDEO
LIVE DEMO VIDEOS
Will this product fit your bike?
If you’re unsure whether the Weiser-Technik BMW R 1300GS mirror kit with built-in warning triangles will fit your motorcycle, there’s a simple test you can perform to find out.
Follow the link below to watch a short video demonstrating the test:
Watch Demonstration
How to Perform the Test:
To carry out this test, you will need a standard M10 bolt that is 5 cm long with a 1.5mm pitch. The M10 x 1.5mm pitch bolt is the standard size required for this test.
Important Note: M10 bolts with a 1.25mm or 1.0mm pitch are not compatible and should not be used for this test.
Step-by-Step Instructions:
- Remove your current mirror from the handlebar mount.
- Insert the M10 x 5cm x 1.5mm pitch bolt into the mount where the mirror was attached.
- Check if the bolt screws in smoothly. It should go in without requiring excessive force.
- If the bolt threads in easily and smoothly, your bike is compatible with the mirror kit. If it doesn’t, the mirror kit may not fit.
We recommend watching the video first, as it clearly shows how to perform the test.