$85.00 – $449.00
EXTREME KTM RANGE
Powerful spearhead shape LED turn signals, brake lights and driving lights designed for KTM bikes from 2007 onwards.
EXTREME KTM Function Options
Shown On KTM 1200
Every Weiser LED panel combines innovative and robust electronic circuit board design and industry-leading OSRAM LED technology.
Single Function Turn Signals
For a safer riding experience, upgrade your turn signals with 12 high intensity ultra amber LED lights and increase visibility when you turn.
Dual Function Driving Lights
Upgrade your turn signals with 12 ultra amber LED lights, combined with an additional 12 bright white LED driving lights within the same housing for impressive day or nighttime illumination.
Triple Function Brake Lights
Upgrade your rear turn signals with 12 ultra amber LED lights combined with an additional 12 intense red LED running lights, which become extra intense red LED lights when braking.
The Brightest Multifunction LED Lights on the Market
Weiser EXTREME KTM LED lights are the brightest single function and multifunction lights you can buy and ramp up the safety factor when it comes to directional and braking maneuvers.
All EXTREME KTM kits are powered by OSRAM, the most trusted name in automotive industry LED lighting.
Ride with confidence, whatever the weather, whatever the conditions, safe in the knowledge you’re more visible to road users and pedestrians.
Simple Installation
Weiser EXTREME KTM LED panels are designed to fit straight into your bikes existing OEM housings. There’s no need to modify the existing wiring. Just simply replace the original OEM lights with the new LED panel. If you’re installing multifunction lights all additional wiring is supplied with the kit.
Weiser LEDs are guaranteed CANbus compatible and are designed to comply with current automotive electronics safety standards and work with your existing electronics.
This makes EXTREME KTM LED lights extremely quick and easy to install. Single function turn signals should take no more than about 10 minutes per signal. Dual function and triple function products take 1-2 hours depending on your understanding of your bike electronics, and whether you’re installing only the front or rear lights, or both. All kits are sent out with all the components labelled along with wiring instructions and a circuit diagram.
What Other Riders are Saying About Weiser LED Lights
EXTREME KTM FAQs
Will I need special tools?
The tools required depend upon the product being installed. The turn signals require only a Phillips screwdriver. Please refer to the installation instructions for the 2-in-1 products.
Will I need to add a load equalizer if I convert to LEDs?
No. The Weiser Ultrabrights are designed to work whether or not your bike has a CAN bus system. Although they work on a lower current than standard bulbs, they will not show a bulb failure warning on the dash.
How long will the install take?
Installation should take no more than five minutes per signal. This is for the turn signal ONLY. The 2-in-1 products take 1-2 hours depending on experience with electrical systems, and whether you are installing only the front or rear lights, or both.
Any question?
If we still haven’t answered your question, you can contact us below and we will get back to you as soon as possible. Make sure to check our full list of FAQs before making contact, as we may have already answered your question.
Choose the Right Lights for your Bike
Powerful LED light upgrades are available for all types of makes and models. Use the Light Finder to choose the right LEDs.
Can’t find your bike? Please Click Here to register your bike
